Description
Cisco WIC 1DSU-T1 V2 Card Overview:
Cisco WIC 1DSU-T1 V2 Card are available at the best price in Pakistan from IT Networks
| PART NUMBER | WIC-1DSU-T1-V2 |
| Description | Updated one-port T1/fractional T1 DSU/CSU WIC |
| Router families supported | 1700 (1720, 1721, 1751, 1760), 2600XMs, 2691, 3631, 3725, 3745, and ICS 7750 |
| Wet T1 Capable | Yes |
| Short Cable Length Command | Yes; used to configure attenuation for short cable lengths (<660 feet) |
| Network Equipment Building Standards (NEBS) | Yes: Type I/III |
| Cisco IOS Software Release | 12.2(15)ZL PCBU special [Cisco 1700 Series only] 12.2(17) Mainline 12.3(1) Mainline 12.3(1st)T |
| Support on IAD2430 Series | The IAD2431-8FXS, IAD2431-16FXS, IAD2432-24FXS, IAD2431-1T1E1 are supported on the following releases: 12.3(7)T4 12.3(8)T6 12.3(11)T2 Network clock participate was added, and is available in releases: 12.3(7)T6 12.3(8)T6 12.3(11)T2 |
| Width (mm/in) | 79/3.1 |
| Height (mm/in) | 21/0.8 |
| Depth (mm/in) | 122/4.8 |
| Weight (g/lb) | 62/0.14 |
| Transmit bit rate | 1.544 Mbps +/- 50 bps |
| Receive bit rate | 1.544 Mbps +/- 100 bps |
| Line code | AMI, B8ZS |
| AMI ones Density | Forced/bit robbing (N X56) High Level Data Link Control (HDLC) data inversion (N X64) |
| Framing Format | (SF) and ESF |
| Output level (LBO) | 0, -7.5, or -15 dB |
| Input level | +1 dB0 to -24 dB0 |
| Data Rates | N x 64 kbps (N = 1 through 24); nonchannelized N x 56 kbps (N = 1 through 24); nonchannelized |
| Interface connector | RJ-45 |
| System timing | Network and internal |
| Loopbacks | Network line loopback; user initiated Recessed push button for network line loopback; toggle on/off Network line loopback; telco initiated Network payload loopback Local date terminal equipment (DTE) loopback Remote line and payload loopback (codes: V.54 loop up, and loop down) |
| Self-Test | Self-Test activated by user |
| Test patterns (BERT) | 1:2, 1:5, 1:8, 3:24, QRW, All 0s, All 1s, user-programmable 24-bit patterns |
| Network (T1) alarms | Red alarm: Loss of network signal Blue alarm: Loss of network frame (AIS) from network Yellow alarm: Receive from network |
| Performance reports and error counters | Cyclic redundancy check (CRC), bipolar violation (BPV), OOF [EXPAND?], errored seconds, burst errored seconds, severely errored seconds, Ft and Fs framing errors for SF framing, FPS [EXPAND?] framing errors for ESF framing, 24-hour history stored in 15-minute increments |
| LEDs | CD (data carrier detect) LP (loopback) AL (alarm) |
| Telnet/console | Remote and local configuration, monitoring, and troubleshooting from Cisco IOS CLI |
| SNMP | Router and DSU/CSU managed by single SNMP agent; router, DSU, and CSU appear as a single network entity to user Standard MIB (MIB II) Cisco integrated DSU/CSU MIB RFC 1406 |
| SNMP traps | Generated in response to alarms |
| Regulatory Compliance | FCC Part 15 Class B TIA/EIA-IS-968 Industry Canada CS-03 Part II JATE Digital CAN/CSA-C22.2 No. 60950-00 UL 60950-2000 IEC/EN 60950 TS001 AS/NZS 3260 NEBS Type I/III |
| Standards | AT&T Pub 62411 ANSI T1.403 |
| Operating temperature | 0 to 40ºC (32 to 104°F) |
| Storage temperature | -20 to 65ºC (-4 to 149°F) |
| Realative humidity | 10 to 85 percent noncondensing operating; 5 to 95 percent noncondensing, nonoperating |
Get More Information
Do you have any question about the Cisco Switch?
For any query and details feel free to Contact us now via Live Chat Call or E-mail us at info@itn.com.pk.
