Cisco WS-C3560X-24P-S


24 * 10/100/1000 Ethernet PoE+ ports
Four optional uplink network modules with GE or 10GE ports
435W POE power budget with up to 30W per port
Dual redundant, modular power supplies and fans
baseline Layer 3 routing features
Flexible NetFlow and switch-to-switch hardware encryption with the Service Module uplink
USB Type-A and Type-B ports for storage and console respectively and an out-of-band Ethernet management port

SKU: ITN_6472410760 Categories: , ,
Cisco Data Center Solution


Cisco WS-C3560X-24P-S Data Sheet Analysis

General Overview

The Cisco WS-C3560X-24P-S is a high-performance managed switch designed for enterprise and advanced network environments. It offers robust Layer 2 and Layer 3 switching capabilities, making it suitable for both small and large networks. The switch is rack-mountable in a 1U form factor, allowing for efficient use of space in a data center or network closet.

Key Specifications

Manufacturer: Cisco Systems, Inc
Manufacturer Part Number: WS-C3560X-24P-S
Product Type: Switch – 24 ports – Layer 3 – Managed
Form Factor: Rack mountable – 1U

Switch Ports and Connectivity

  • Switch Ports: 24 x 10/100/1000 Ethernet Ports
  • Power Over Ethernet (PoE): Yes, supporting PoE+ for higher power requirements of connected devices
  • Interfaces:
    • 24 x 10Base-T/100Base-TX/1000Base-T – RJ-45 – PoE
    • 1 x 4 PIN USB Type A
    • 1 x console – mini-USB Type B – management
    • 1 x RS-232 – RJ-45 – management
    • 1 x 10Base-T/100Base-TX – RJ-45 – management

Routing and Management Protocols

  • Routing Protocols:
    • OSPF stub
    • EIGRP Stub
    • PIM stub
    • RIP-1, RIP-2
    • Static IP routing, RIPng
  • Remote Management Protocols:
    • SNMP 1, SNMP 2, SNMP 2c, SNMP 3
    • RMON 1, RMON 2, RMON 3, RMON 9
    • Telnet, TFTP, SSH, CLI

Authentication and Security

  • Authentication Methods:
    • Kerberos
    • Secure Shell (SSH)
    • RADIUS
    • TACACS+

Advanced Features

  • Switching Features:
    • Hot swap module replacement
    • Layer 2 and Layer 3 switching
    • Dynamic IP address assignment
    • DHCP support
    • Auto-negotiation, ARP support
    • Trunking, VLAN support
    • Auto-uplink (auto MDI/MDI-X)
    • IGMP snooping
    • Syslog support
    • Traffic shaping
    • Storm control (Broadcast, Multicast, Unicast)
    • Rapid Spanning Tree Protocol (RSTP) support
    • DHCP snooping
    • Dynamic Trunking Protocol (DTP) support
    • Port Aggregation Protocol (PAgP) support
    • Access Control List (ACL) support
    • Quality of Service (QoS)
    • Jumbo Frames support
    • MLD snooping
    • Dynamic ARP Inspection (DAI)
    • PoE+
    • Per-VLAN Spanning Tree Plus (PVST+)
    • EIGRP Stub Routing

Hardware and Power

  • DRAM Memory: 256 MB
  • Flash Memory: 64 MB Flash
  • Status Indicators: Port status, link activity, port transmission speed, port duplex mode, power, system
  • Expansion Slot(s): 1 (total) / 1 (free) x Expansion Slot

Power Supply:

  • Power Device: Power supply – redundant – plug-in module
  • Installed Qty: 1 (installed) / 2 (max)
  • Power Redundancy: Optional (1+1 with optional power supply)
  • Voltage Required: AC 120/230 V (50/60 Hz)
  • Features: Redundant Power System (RPS) connector

Dimensions and Weight

  • Width: 44.5 cm
  • Depth: 46 cm
  • Height: 4.5 cm
  • Weight: 7.1 kg
  • Rack Mounting Kit: Optional

Compliance and Standards

  • Compliant Standards:
    • IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae, IEEE 802.3at
  • Certifications:
    • CE, TUV GS, CISPR 22 Class A, GOST, cUL, NOM, VCCI Class A ITE, EN55022 Class A, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, CCC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, KCC, FCC Part 15 A, CSA C22.2 No. 60950-1

System Software

  • Software Included: Cisco IOS IP Base

This switch is well-suited for businesses that need reliable and scalable network performance with a range of advanced features. Its support for PoE+ makes it ideal for environments with IP phones, wireless access points, and other PoE-powered devices. Additionally, its extensive support for various routing protocols and management features ensures it can be integrated into complex network setups.



Cisco Data Center Solution